Chevrolet Aveo 2007 Owner's Manual page 195

4. Press and hold one of the six numbered
buttons for more than two seconds. The preset
button number one through six flashes on the
display when the station has been set. When
that numbered preset button is pressed, that
preset station returns.
5. Repeat the Steps 1 through 4 for each preset
button.
Order of Sound Function
The order for displayed sound function is BASS,
TRE, BAL, FADE, EQ OFF, and VOL (Bass,
Treble, Fade, Balance, Equalization Off,
and Volume).
Setting the Tone (Bass/Treble)
SOUND (Bass/Treble): Press this button until
BAS (bass) displays. Turn the
or to decrease the bass. The display shows the
bass level. After making the selection, press
this button to set the bass level selection.
knob to increase
O
Press this button until TRE (treble) displays. Turn
the knob to increase or to decrease the
O
treble. The display shows the treble level. After
making the selection, press this button to set
the treble level selection. If a station is weak or
has static, decrease the treble.
Adjusting the Speakers (Balance/Fade)
SOUND (Balance/Fade): To adjust the balance
between the right and the left speakers, press
this button until BAL (balance) displays. Turn
the knob to increase or to decrease. The
O
display shows the balance level. After making
the selection, press this button to set the
balance level.
To adjust the fade between the front and the rear
speakers, press this button until FAD (fade)
displays. Turn the
O
decrease the fade between the front and the rear
speakers. The display shows the fade level.
After making the selection, press this button to set
the fade level.
knob to increase or to
195