LG -P880g Quick Start Manual page 44

Safety
FCC limit for RF exposure from wireless
telephones is set at a Specific Absorption
Rate (SAR) of 1.6 watts per kilogram
(1.6 W/kg). The FCC limit is consistent
with the safety standards developed by
the Institute of Electrical and Electronic
Engineering (IEEE) and the National
Council on Radiation Protection and
Measurement. The exposure limit takes
into consideration the body's ability to
remove heat from the tissues that absorb
energy from the wireless phone and is set
well below levels known to have effects.
Manufacturers of wireless phones must
report the RF exposure level for each
model of phone to the FCC. The FCC
40
website (http://www.fcc.gov/oet/rfsafety)
gives directions for locating the FCC
identification number on your phone so
you can find your phone's RF exposure
level in the online listing.
8. What has the FDA done to measure the
radio frequency energy coming from
wireless phones?
• The Institute of Electrical and Electronic
Engineers (IEEE) is developing a
technical standard for measuring the
radio frequency energy (RF) exposure
from wireless phones and other wireless
handsets with the participation and
leadership of FDA scientists and