Cadillac 2011 SRX Owner's Manual page 88

Hide thumbs Also See for 2011 SRX:
Table of Contents

Advertisement

3-26
Seats and Restraints
Shoulder Belt Height Adjuster
The vehicle has a shoulder belt
height adjuster for the driver and
right front passenger seating
positions.
Adjust the height so that the
shoulder portion of the belt is on
the shoulder and not falling off of it.
The belt should be close to, but
not contacting, the neck. Improper
shoulder belt height adjustment
could reduce the effectiveness of
the safety belt in a crash. See How
to Wear Safety Belts Properly on
page 3 19.
Ofrecido por www.electromanuales.com
Move the height adjuster up to the
desired position by pushing up on
the height adjuster.
After the height adjuster is set to
the desired position, try to move it
up or down without pressing the
release button (A) to make sure it
has locked into position. Press the
release button to lower the height
adjuster.
Safety Belt Pretensioners
This vehicle has safety belt
pretensioners for front outboard
occupants. Although the safety
belt pretensioners cannot be seen,
they are part of the safety belt
assembly. They can help tighten the
safety belts during the early stages
of a moderate to severe frontal and
near frontal crash and will deploy in
side, rear and rollover events if the
threshold conditions for pretensioner
activation are met.
Pretensioners work only once.
If the pretensioners activate in a
crash, they will need to be replaced,
and probably other new parts for
the vehicle's safety belt system.
See Replacing Safety Belt System
Parts After a Crash on page 3 30.

Advertisement

Table of Contents
loading

Table of Contents