Table of Contents
Advertisement
qsg_6400.fm Page 5 Wednesday, November 20, 2002 2:55 PM
Overview of the SonicWALL Hardware
Power Light
WAN
Link, 100, Activity
Link, 100, Activity
*DMZ port is available on the PRO 100, PRO 200, PRO 300, PRO 230, PRO 330, and GX series. It is labeled HomePort on the TELE3 TZ and TELE3 TZX.
Depending on the model purchased, there may be additional ports on the appliance.
Begin the Installation of Your SonicWALL
Applying Power to the SonicWALL
1
If you are installing a TELE3, TELE3 SP, TELE3 TZ, TELE3 TZX, SOHO3 or PRO 100, attach the power
supply to the power cord. Plug the power adapter into the SonicWALL and plug the other end into a
power outlet.
If you are installing a PRO 200, 300, PRO 230, PRO 330, or GX series, attach the power cable to the
power input of the SonicWALL, and the other end into an AC outlet. Use the power switch to turn on the
SonicWALL.
The Power light turns green when power is applied to the SonicWALL. Also, the Reset light remains lit for
approximately 90 seconds while the SonicWALL performs a series of diagnostic tests.
Reset Light
LAN
DMZ*
Link, 100, Activity
Reset
CLI Port
LAN Port
DMZ Port*
WAN Port
Power
Set Up Continues
SonicWALL Quick Start Guide Page 5
Advertisement
Table of Contents
