Setting The Anti-Skate Adjustment; Specifications - ION USB Turntable Quick Start Owner's Manual

Setting the Anti-Skate Adjustment

In most cases, the Anti-Skate should be set to its minimum setting. Anti-
Skate compensates for inward tracking forces that occur with certain
cartridges when the stylus nears the center of the record. If the turntable
is experiencing excessive skipping during back-cueing and scratching
while nearing the center spindle, try increasing the Anti-Skate in the
increments indicated on the dial. Start by adding an increment of 1, test
its performance, than increase it more, and so on.
IMPORTANT
Make sure that the felt slipmat is always placed on top of the platter while
using the turntable. Failure to use the slipmat may cause damage to your
media as well as damage to the turntable.
Remove the plastic cartridge cover (needle cover) before operating the
turntable.
BEFORE RETURNING THE PRODUCT, please contact Ion Audio or
your retailer for technical support. Contact information can be
found in the Safety Instruction Booklet included with this product.
Manual Version: 1.1
Part List:
o ION AUDIO USB Turntable
o
o
o
o
o
USB Cable Included
o
45 RPM Adapter Included
o
Software CD (MAC/PC)
o
Software User Manual
o
Hardware Quick Start Guide
o
Product Weight (with Packaging): 12 lbs
Turntable Weight: 7.7 lbs
Master CTN dimensions: 20.27" x 17.16" x 6.85"
Motor: Belt Drive
Pitch: +/- 10%, 33 1/3 RPM or 45 RPM operation
Inputs: 1/8" stereo line level
Outputs: RCA (LINE/PHONO), USB Audio.
Spezifikationen
Counterweight for tonarm
Platter w/belt
Slipmat
Cartridge pre-mounted on Headshell
RCA Cable connected