General Controls - ION USB Turntable Quick Start Owner's Manual

Make sure all items listed on the front of this guide are included in the
o
box.
READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE
o
PRODUCT
Go to http://www.ion-audio.com for product registration.
o

GENERAL CONTROLS

1. Power Cable: This power cable should be plugged into a wall
receptacle AFTER all audio connections are made.
2. RCA Audio Output Cables: These cables should be plugged into a
CD or Auxiliary input on your computer.
IMPORTANT: There is a switch on the bottom panel, next to the RCA
cables that selects between PHONO/LINE. Use PHONO level for
plugging into a turntable input on a home stereo. Use the LINE level
for plugging into CD/AUX/TAPE inputs. WARNING: You may
damage your receiver if you plug in a LINE level into a PHONO
input.
3. USB Audio Output: Use the included USB Cable to connect your
turntable to your computer. Refer to the software instruction guide
before plugging in your turntable.
4. Power Button: This ring around the power button illuminates red
when the turntable is switched on.
5. Platter: This platter must be securely fastened to the turntable prior
to operation. The Motor Drive Belt can be found on the drive ring
(ENGLISH) QUICK START GUIDE