Table of Contents
Advertisement
96
IBM : Hardware Maintenance Manual
POST Error Code
168
Alert on LAN error
17X, 18X
175
176
177
Corrupted Administrator Password
178
183
184
No RFID Antenna
185
Corrupted boot sequence
186
187
189
190
Chassis intrusion detector was cleared. This is
information only, no action required. If this
code does not clear:
1XX
Not listed above
201, 20X
Memory data error
225
229
External cache test error
262
POST detected a base memory or extended
memory type error
301
303
With an 8603 error
FRU/Action
1.
Run Setup. Check to see that Ethernet
and Alert on LAN are enabled.
2.
System Board
3.
Riser card
1.
C2 Security
1.
Run Configuration. See "Setup Utility
program" on page 10.
2.
System Board
1.
Covers were removed from the computer
1.
System Board
1.
System Board
1.
Enter the administrator password
Make sure Asset Care and Asset ID are
enabled in Configuration/Setup
2.
RFID Antenna
3.
System Board
4.
Riser card
1.
Set configuration and reinstall the boot
sequence
1.
System Board
1.
Clear Administration password
2.
System Board
1.
More than three password attempts were
made to access the computer
1.
System Board
1.
System Board
1.
Run Enhanced Diagnostics Memory Test
2.
Memory Module
3.
System Board
1.
Unsupported Memory
1.
L2 Cache Memory
2.
System Board
1.
Run Setup. Check System Summary
menu for memory. (See "Setup Utility
program" on page 10.)
2.
Run the Extended Memory Diagnostic
tests.
1.
Keyboard
2.
Keyboard Cable
3.
System Board
1.
Mouse
2.
Keyboard
3.
Keyboard Cable
4.
System Board
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
