Jøtul F 371 Installation And Operating Insctruction Manual page 16

ENGLISH
Fig. 27
3. Place the riddling grate in position on the base plate. Check
that the riddling grate's slot on the right side is entered into
the riddling bar (fig. 27 A).
4. Place the ash pan at the bottom of the product.
5. Place the rear burn plate in the base plate's rear groove.
6. Place the side burn plates on each side in the base plate's side
grooves. Move the baffle plate in and place it so that it rests
on the side and rear burn plates.
7. Hold the baffle plate while the other side burn plate is
mounted.
16
Fig 28
8. Let the baffle plate rest on the burn plates.
9. Place the small side burn plates (fig. 28 A) in the base plate's
groove under the side glasses.
10. Replace the top plate with the top grid and bowl.
11. Place the product data plate which is in the ash pan,
underneath the burn chamber.