Replacing the fuses
The main fuse and fuel injection system
fuse are located in the starter relay
case behind panel B. (See page 7-9.)
To access the fuses, remove the quick
fastener and push the starter relay case
cover inward to unhook it from the slot,
and then pull the cover off.
1
3
1. Starter relay case cover
2. Quick fastener
3. Slot
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU45661
1
3
1. Main fuse
2. Fuel injection system spare fuse
3. Fuel injection system fuse
The fuse box, which contains the fuses
2
for the individual circuits, is located be-
hind panel A. (See page 7-9.)
1. Fuse box
2
1. Spare fuse
2. Signaling system fuse
3. Ignition fuse
4. Auxiliary DC connector fuse
5. Headlight fuse
6. Backup fuse (for clock)
7. Auto-decompression fuse
If a fuse is blown, replace it as follows.
1
1. Turn the key to "OFF" and turn off
2. Remove the blown fuse, and then
7-34
1
7
6
5
4
3
2
the electrical circuit in question.
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
[EWA15131]
7