Appendix
150 Mbps Mode settings
By default, 150 Mbps mode on your AirStation wireless client is set to OFF. Use the utility software
AirStation Bandwidth 20/40MHz Select Tool, which comes with this unit, to turn on 150 Mbps mode.
To configure it:
1. Click "Start" > "All Programs" > "BUFFALO" > "AirStation Utility" > "AirStation Bandwidth
20/40MHz Select Tool" and launch the utility software.
If you are using Windows Vista and the message "A program needs your permission to
continue" is displayed, click "Continue".
2. When the message "Now start the step wizard of Bandwidth Select Tool" is displayed, click
"Next".
3. Click "Next".
4. When the message "Select of wireless adapter", select this unit and click "Next".
5. Select "Use 150Mbps Mode (40MHz)", and click "Next".
6. When the message "Wireless adapter setting is competed." is displayed, click "Exit to setup".
If you still cannot establish a 150 Mbps communication speed, check the settings on your access
point.
WLI-UC-GNHP User Manual
63