Trouble Shooting - Buderus Logano G215 WS Operating Instructions Manual

4

Trouble shooting

4 Trouble shooting
We differentiate between two types of faults
– Burner faults and
– Control unit and heating system faults.
A fault lamp on the burner illuminates if the burner
develops a fault. Generally, such faults can be reset by
pressing the reset button on the burner.
Control device and heating system faults are indicated
on the control device display, subject to the control
device being equipped with a display. For further
information see control device documentation.
Correcting burner faults
Press the burner reset button (
documentation).
SYSTEM DAMAGE
through frost.
The heating system can freeze up, if it has
CAUTION!
been switched OFF through a fault
shutdown.
Try to remedy the fault.
Contact your installer immediately if
this is not possible.
10
burner
Operating instructions Logano G215 WS oil/gas-fired special boilers • Issue 02/2006
1
Fig. 7 Resetting the burner
1 Burner
We reserve the right to make any changes due to technical modifications.