12 Self Proguamming Mode
•
You can program the QT in steps of 0.1 Hz.
•
You can program the QT according to the normal
table of frequencies.
•
You can program the DQT (Normal) in steps of 1.
•
You can program the DQT (Normal) according to
the normal table of codes.
•
The QT/DQT is not used.
Press and hold the [ ] key for more than 1
second to toggle between Normal and Inverse
when DQT is selected.
•
"N" represents Normal.
•
"I" represents Inverse.
34
12.2.1.3 TX Frequency
This function allows you to program the transmit
frequency.
The current frequency appears after the "T.".
Press the [ ] key to change the frequency step.
Press and hold the [ ] key for more than 1 second
on a programmed Channel, to delete the Channel.
Press and hold the [ ] key for more than 1 second
on a Channel that is not programmed, to display the
default frequency.
12.2.1.4 QT/DQT Encode
This function allows you to program the QT/DQT
Encode.
The following display appears when the QT/DQT
Encode is not programmed.
Press the [ ] key to program a QT frequency or DQT
code.
•
You can program the QT in steps of 0.1 Hz.
•
You can program the QT according to the normal
table of frequencies.