Connecting Your Camera; Connecting Your Camera To A Pc - ION AIR PRO WIFI Quick Start Manual

4. Press the WiFi power button on the WiFi PODZ to turn on your WiFi. The blue LED lights up to indicate the
WiFi is warming up. It will take around 15-20 seconds for the WiFi to warm up and become connectable.
The LED will flash when the Wi-Fi function is active or connected.
5. Press the WiFi power button to turn off the WiFi anytime.
Notes:WiFi will drain your camera battery more rapidly when activated. Turn the WiFi off if you are not using it
to change settings or upload content.
3.2 Connect The Camera to Your Computer
1. Turn on your WiFi PODZ.
2. Go to network setting of your PC and choose WiFi setting. Search the network, find and click "WIFIPODZ"
3. Enter password "123456789" and you can connect to your camera.
4. Open your Internet browser and input "192.168.1.2". You can view the files stored in your camera
3.3 Connect The Camera to Your Smart Device (Browser)
1. Turn on your WiFi PODZ.
2. Go to network setting of your mobile device and choose WiFi setting. Search the network, find and click
"WIFIPODZ"
3. Enter password "123456789" and you can connect to your camera.
4. Open your Internet browser and input "192.168.1.2" or "wifi.podz". You can view the photos and videos
stored in your camera.
3.4 Connect The Camera to Your Smart Device (App)
1. Search iontheaction app at the App store.
2. Download and install the app to your smart device
3. Turn on your WiFi PODZ.
4. Go to network setting of your PC and choose WiFi setting. Search the network, find and click "WIFIPODZ"
5. Enter password "123456789" and you can connect to your camera.
6. Open your app.
7. You can refer to app page for the detailed operation description.
Notes: As long as your camera starts video recording, the live streaming and file play back and transfer function
will be temporarily disabled. You can resume the functions when your camera in standby status.

4. Connecting Your Camera

4.1 Connecting Your Camera to a PC

To open the ion software,
1. Inserted a MicroSD card into your camera and make sure there is at least 2MB free space.
2. Connect your camera to a PC via the USB cable included.
3. Press the Power button to turn the camera
EN-5