STARTING YOUR WIRELESS EXPERIENCE
Install WiFi PODZ
1.
Remove your PODZ and put your WiFi PODZ to the camera PODZ socket
2.
Seal the camera by rotating the back cover and slide the latch until it is locked
3.
Press and hold the Power
4.
Press the WiFi power button on the WiFi PODZ to turn on your WiFi. The blue
LED lights up to indicate the WiFi is warming up. It will take around 15-20
seconds for the WiFi to warm up and become connectable. The LED will flash
when the Wi-Fi function is active or connected.
5.
Press WiFi power button to turn off the WiFi anytime.
WiFi will drain your camera battery more rapidly when activated. Turn the WiFi
off if you are not using it to change settings or upload content.
Connect The Camera to Your PC
1.
Turn on your WiFi PODZ.
2.
Go to network setting of your PC and choose WiFi setting. Search the network,
find and click "WIFIPODZ"
3.
Enter password "123456789" and you can connect to your camera.
4.
Open your Internet browser and input "192.168.1.2" or "wifi.podz". You can
view the files stored in your camera
button to turn on your camera
www.iontheaction.com
EN -
21