Advertisement
Connect the USB storage device to one of the two USB 2.0 interfaces on the receiver rear panel. Press the
button to access the receiver' s main menu. The following display will appear:
Select the "Service menu" with the
tons to select "USB Device Management" and confi rm with the
(Example):
Your
storage
must be formatted
to "FAT32". If your
storage medium
does not have this
format, you must fi rst format
it in the receiver menu: "USB
Device
Management"
Messages/Error Messages at
the top of page 15).
FORMATTING AN EXTERNAL USB STORAGE MEDIUM
If a partitioned USB storage medium is formatted, all partitions are deleted and the
entire hard disk is formatted with a "FAT32" partition.
If more than one external storage device is connected to the receiver, use the
storage device to be formatted.
FORMATTING AND SCANNING AN
EXTERNAL USB STORAGE MEDIUM
buttons and confi rm by pressing
external
medium
(see
. Next, use the
button. The following display will appear
buttons to select the
but-
3
Advertisement
