HTC Sapphire Service Manual page 11

Doc. Title
Install the SD card
If you need more storage for your device, you can
install an SD card into the slot on the upper part
of the device. To install the SD card, gently insert
the card into the slot (with its gold contacts
facing down) until it snaps in place.
To remove the SD card, make sure that no
application is accessing the card. Press the card
to pop it out slightly and gently pull the card out
of the slot.
Charge the battery
New batteries are shipped partially charged. Before you start using your device, you have to install and
charge the battery. Some batteries perform best after several full charge/discharge cycles. You can
charge the battery in two ways:
• Connect your device directly to an
electrical outlet using the AC adapter.
• Plug the sync cable to the USB port on
your PC and to the sync connector on
your device.
When your device is turned off, charging is indicated by a solid amber light on the LED
indicator.
When your device is turned on, charging is indicated by a solid amber light on the LED
indicator as well as a charging icon (
After the battery has been fully charged, the LED indicator becomes green and a full
battery icon
( ) appears on the Today screen.
HTC CONFIDENTIAL
HTC Corporation.
.
Sapphire Service Manual
Doc. No.
Issued Date
Revised Date
Page
) on the Today screen.
DOC-00051810 REV.
2008/12/29
AX02
2009/01/14
11 of 91
SM-TP008-1125