Garmin GPS 155XL Installation Manual page 26

4.3.1 Display Adjustment
This page allows the setting of display parameters that affect the display backlight and lighting brightness
in automatic mode.
Setting
Response Time Sets the speed with which the brightness responds to ambient light changes. The
higher the number, the slower the display responds.
Min
Sets the minimum brightness of the display. The higher the number, the brighter
the minimum brightness.
Slope Sets the sensitivity the brightness of the display has to changes in ambient light.
The higher the number, the brighter the display will be for a given increase in
ambient lighting
For more information on the display setting, see the display contrast and mode set page and the backlight
set page described in the Pilot's Guide (P/N 190-00067-20 for the GPS 155XL and P/N 190-00067-30 for
the GNC 300XL).
4.3.2 I/O Channel 1
Select the I/O CHANNEL 1 Test Page. Change the selectable input and output to match that of the
installed equipment. The available options are:
Input:
Setting
off No units connected to Channel 1 input
icarus-alt Serial altitude received from: Icarus Model 3000 Mode C Serializer
shadin-alt Serial altitude received from:
Shadin 9000T Serializer System (Non-TSO'd),
Shadin 9200T Series Serializer System (Non-TSO'd),
Shadin 8800T Series Encoder System (TSO'd)
shadin-fuel Fuel information received from:
Shadin 91204XT Series Digital Fuel Management System (TSO'd)
Shadin 91053XT Series Digital Fuel Management System (TSO'd)
arnav/ei-fuel Fuel information received from:
Arnav Model FC- 10 Fuel Computer (TSO'd)
Arnav, Model FT- 10 Fuel Totalizer (TSO'd)
Electronics International Model FP-5L Fuel Flow, Computer (Non-TSO'd)
shadin-adc Air data information received from various models from the 9628XX-X family
shadin-fadc Fuel/Air data information received from various models from the 9628XX-X family
Verify with the manufacturer of the data input device that the unit supports a Garmin interface.
Page 4-2
Revision F
Description
Description
NOTE
GPS 155XL/GNC300 XL Installation Manual
190-00067-22