Figure 3.29 Removing Cables; Figure 3.30 Removing A Board - Samsung OfficeServ 7400 Installation Manual

CHAPTER 3. Ошибка! Стиль не определен.
2) When replacing a control board, first, remove the extension cable connecting the
MP40 board to the LP40 board. Also, remove all cables connected to the board to be
replaced.
3) Extract the board by pulling the lever of the board carefully.
3-24
LP40
LINK1
LINK3
MISC1
LINK2
PSC
MISC2
LINK23
MP40

Figure 3.29 Removing Cables

Figure 3.30 Removing a Board

© SAMSUNG Electronics Co., Ltd.