Important Information 4 Each Time After Usage; Pull Out The Plug; Important Safety Instructions 4 Emptying The Tank; Switching Off The Cleaner - Kärcher BR VS 400 Operating Instructions Manual

English
INSTRUCTIONS FOR USE
WARNING!
The cleaner must always be in motion
during operation!
Do not work on one spot as this may
damage the floor covering!
Instructions for use
Prior to using the appliance on
delicate surfaces (PVC, carpets)
tilt it
–
Switch the cleaning agent feed on
–
Do not operate it until the machine
–
has been filled with cleaning agent.
Note:
The cleaning agent feed is effected
only if the brush drive is switched on.

Scrubbing

Remove loose dirt by brushing
*
before working with the cleaner
Match the amount of cleaning
*
agent solution on the floor covering
to the level of dirt
Select rotary brushes suitable for
*
the dirt and floor covering

Polishing

Polishing is carried out without
*
using liquid
The brush well must be as dry as
*
possible before the pad is fitted
EACH TIME AFTER USAGE

Pull out the plug

Pull the power cable out of the
–
socket
Disconnect the plug from the power
–
cable
Remove the strain-reliever
BR VS 400 *USA
Emptying the tank
Remove the tank, empty and rinse
with water
Note:
Dispose of the cleaning agent
solution in accordance with the
relevant regulations.
Heed the instructions of the cleaning
agent's manufacturer.

Switching off the cleaner

Release the pushing handles and tip
forwards
Lift the appliance
Engage the safety device
Position the cleaner vertically
Note:
Do not leave the cleaner on the rotary
brushes
9
Dismantle the rotary brushes
Note:
If the machine is not positioned
vertically the rotary brushes must be
dismantled
Remove the tank
–
Carefully lay the cleaner down
–
Press down and suspend the rotary
brushes
Remove the rotary brushes from the
gearing