Printing With Metallic Silver/White/Cmyk Color In A Single Pass; In A Single Pass - Roland XC-540MT Manual

3-2 Using Metallic Silver/White/CMYK Color Inks

Printing With Metallic Silver/White/CMYK Color in a Single Pass

This section describes how to perform single-pass printing using metallic silver ink, white ink, and CMYK color
ink. Printing is performed in a single pass, but you vary the printing settings depending on which of white ink
or all the other inks (metallic silver and CMYK colors) is used as the undercoat.
The printing data containing metallic colors such as "RDG_MetallicSilver" and "RVW-MT-Bronze" must be used
in order to use the metallic silver ink, and the printing data containing "RDG_WHITE" must be used in order
to use the white ink.
 P. 9, "Creating Printing Data
Procedure
 Make sure that you have finished making the preparations for VersaWorks, creating the
printing data, and getting the printer ready ( page 7, "Chapter 2 Getting Ready").


34
Chapter 3 Printing
Double-click .
"Queue A Properties" window appears.
Click .
For [Media Type], select "xxx[MT]:
Clear Film" or "xxx[MT]: Clear Film,
Adhesive."
* "xxx" indicates "ESP-CL" and others.
With [Mode], select the print mode.
White -> CMYKMt (v) +xxx
Inks are overprinted in the sequence of white
and then metallic silver/CMYK Color.
CMYKMt (v) -> White +xxx
Inks are overprinted in the sequence of metallic
silver/CMYK Color and then white.
* "xxx" indicates "+PASSv2" and others.