L2Tp - D-Link DIR-815 User Manual

Section 3 - Configuration
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and
password. This option is typically used for DSL services.
Address Mode:
Select Static if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases, select
Dynamic.
L2TP IP Address:
Enter the L2TP IP address supplied by your ISP (Static only).
L2TP Subnet
Enter the Subnet Mask supplied by your ISP (Static only).
Mask:
L2TP Gateway IP
Enter the Gateway IP Address provided by your ISP.
Address:
L2TP Server IP
Enter the Server IP provided by your ISP (optional).
Address:
Username:
Enter your L2TP username.
Password:
Enter your L2TP password and then retype the password in
the next box.
Reconnect
Use the radio buttons to specify the reconnect mode. The user
Mode: can specify a custom schedule or specify the On Demand, or
Manual option.
To specify a custom schedule, use the drop-down menu to
select one of the schedules that has been defined in the Tools>
Schedules window. To create a new schedule, click the New
Schedule button to open the Tools> Schedules window. Refer
to "Schedules" on page 78 for more information.
D-Link DIR-815 User Manual
Manual Internet Connection Setup

L2TP

30