To Change Password By User - Konica Minolta bizhub pro 950 User Manual

User authentication in security functions
4.5

To change password by user

General users can change the password that has already been set for user authentication.
We recommend that a user himself/herself changes the password assigned by the administrator for security.
!
Detail
Passwords are case sensitive.
If a wrong password or fewer than 8 alphanumerical characters are entered and the [OK] is touched,
the warning message "Password does not match" will appear, and no key will work for five seconds.
Enter the right password after five seconds.
If authentication fails, the information will be saved in the audit log.
Reminder
Do not use your name, birthday, employee number, etc. for a password that others can easily figure out.
!
Detail
If password setup doesn't proceed successfully, the information will be saved in the audit log.
The password currently used cannot be entered as a new password.
1
Press [Utility/Counter] on the control panel.
The Utility Screen will be displayed.
2
Touch [01 System Setting].
The System Setting Screen will be displayed.
bizhub PRO 950 (Version 2)
4
4-15