To Register A New User - Konica Minolta bizhub pro 950 User Manual

4
4.2

To register a new user

Follow the procedure below to setup a new user name and password to be required for user authentication
in Security Functions.
!
Detail
Passwords are case sensitive.
If a wrong password or fewer than 8 alphanumerical characters are entered and the [OK] is touched,
the warning message "Password does not match" will appear, and no key will work for five seconds.
Enter the right password after five seconds.
If authentication fails, the information will be saved in the audit log.
1
Press [Utility/Counter] on the control panel.
The Utility Screen will be displayed.
2
Touch [06 Administrator Setting].
The Input Administrator Password Screen will be displayed.
3
Enter the password.
Use the touch screen keypad to enter the 8-digit Administrator password, then touch [OK].
The Administrator Setting Screen will be displayed.
4-4
User authentication in security functions
bizhub PRO 950 (Version 2)