Cupholders
Fig. 59 Cupholders: in the center console, front / on the folding table in the
center backrest
Fig. 60 Open cup holder in the central console / adjust holder size
First read and observe the introductory information and safety warn-
ings
on page 70.
Image description
» Fig. 59
and
» Fig. 60
Cup holder in front centre console
A
Cup holder on the folding table
B
Location for opening
C
Cup holder in rear centre console
D
Fuse plate
E
Open holder in the rear center console
›
In the cup holder in area
» Fig. 60
C
. Press
The holder slides out.
›
Pull the holder until it stops in the arrow direction
›
Adjust the bracket by sliding the locking plate
Close holder in the rear center console
›
Remove the waste container in the opposite direction to the arrow
WARNING
Never put hot beverage containers in the cup holder. If the vehicle moves,
■
they may spill – risk of scalding!
Do not use any cups or beakers which are made of brittle material (e.g. glass,
■
porcelain). This could lead to injuries in the event of an accident.
CAUTION
Do not leave open beverage containers in the cup holder during the journey.
■
There is a risk of spilling e.g. when braking which may cause damage to the elec-
trical components or seat upholstery.
The cup holder in the rear part of the centre console must be closed (otherwise
■
it could get damaged) before folding forward the rear middle seat.
Note
A 1.5 litre bottle (max. capacity) can be stored in the drinks holder
.
1
in the direction of arrow
.
E
2
1
» Fig.
60.
.
D
73
Seats and useful equipment