6. Partially tighten three 3/8" x 1 1/4" Bolts (2) with
three 3/8" Star Washers (6) into the Right
Upright (92); do not fully tighten the Bolts yet.
Repeat this step with the Left Upright (91).
Firmly tighten all six 3/8" x 1 1/4" Bolts (2).
7. Slide the Right Upright Sleeve (90) up against
the console assembly. Attach the Right Upright
Sleeve with two #8 x 3/4" Tek Screws (24).
Attach the Left Upright Sleeve (not shown) to
the console assembly in the same way.
6
91
2
7
24
9
2
6
92
6
Console
Assembly
24
90