Overview Of Call Forwarding Types; Call Forwarding Key; Editing Call Forwarding Instructions - Siemens HiPath 2000 User Manual

Step by Step
Edit call forwarding
Variable: All calls

Overview of call forwarding types

Different input masks are displayed depending on how
you program call forwarding (call forwarding key
page 83 or Program/Service menu
entries in the relevant menus correspond as explained in
the following table:

Call forwarding key

Variable: All calls
All calls are forwarded, the saved phone number is deleted af-
ter deactivation.
Variable: External calls
Only external calls are forwarded.
Variable: Internal calls
Only internal calls are forwarded.
Call forwarding key
r
The call forwarding key offers a quick way to activate/de-
activate call forwarding instructions
open the "Forwarding" page where you can edit these
instructions

Editing call forwarding instructions

Press the call forwarding key to open the "Forwarding"
page. It provides an overview of all call forwarding types
page 83.
You can select a call forwarding type here and set sta-
tion numbers as forwarding destinations.
z You can also configure this setting via the Web interface
page 199.
r
Press the key quickly. The LED lights up.
Select and confirm the option shown.
The "Forwarding" page opens.
g
Select a call forwarding type
i
Confirm the option shown to enter a forwarding desti-
nation directly
or
g
Enter the station number via a context menu
page 84.
The forwarding destination is automatically deleted
when call forwarding is deactivated
page 83.
page 84.
All changes made here take effect immediately
after a short timeout.
Call forwarding
page 86). The
Program/Service menu
1=all calls
2=external calls only
3=internal calls only
page 86 and
page 83
page 87.
83