Additional Forwarding Types - Siemens HiPath 4000 Operation Manual

Step by step
Destinations?
Call forwarding?
Next forwarding type?
FWD-VAR-ALL-INT
Enter destination:
Save?
Deact call forwarding?

Additional forwarding types

This description applies for the following forwarding
types:
• Forwarding for intnl
• Forwarding for extnl
• Call forwarding - busy
• Call forward. no reply
• Call forward. busy/no reply
Programming a forwarding destination activates call for-
warding. If call forwarding is deactivated, the forwarding
destination is deleted at the same time.
Configuring and activating call forwarding
N
Open the service menu
Confirm the option shown.
Confirm the option shown.
Variable call forwarding is offered first.
Confirm until the required forwarding type
shown in the first line.
Example:
off
Forwarding type with status.
Select and confirm.
j
Enter the call forwarding destination number.
Confirm, when the phone number is complete.
Deactivating variable call forwarding
For "Forwarding for intnl" and "Forwarding for extnl":
r
Press the lit key. The LED key goes out.
For all other forwarding types:
$
Open the idle menu.
Select and confirm.
Call forwarding is deactivated and the destination num-
ber is deleted.
Call forwarding can also be preconfigured in the
system
Making Calls – Basic Functions
page 18.
page 53.
page 25 is
29