Canon PIXMA iP4200 Service Manual page 17

*1: Before replacement of the logic board ass'y, check the waste ink amount (by service test print or EEPROM
information print). If the waste ink amount is 7% or more, also replace the ink absorber kit (QY5-0146) when
replacing the logic board ass'y.
[See Section 3-3. Adjustment / Settings, (5) Service mode, for details.]
*2: Replace the print head only after the print head deep cleaning is performed 2 times, and when the problem
persists.
<Part 1: 2. LIST OF ERROR DISPLAY / INDICATION>
1-11
To the top