Canon PIXMA iP4200 Service Manual page 12

6 times Inner cover open. [1841]
Inner cover open during printing
on paper. [1846]
Inner cover open during printing
on paper (print continuable).
*1
[1851]
Inner cover open during printing
on paper (print NOT continuable).
*1
[1856]
Inner cover closed during CD /
DVD printing (print continuable).
*1
[1850]
Inner cover closed during CD /
DVD printing (print NOT
continuable). [1855]
Multiple ink tanks of the same
7 times
color installed. [1681]
Ink tank in a wrong position.
[1680]
8 times Warning: The waste ink absorber
becomes almost full. [1700]
9 times The connected digital camera or
digital video camera does not
support Camera Direct Printing.
[2001]
10 times Automatic duplex printing cannot
be performed. [1310]
Failed in automatic print head
11 times
alignment. [2500]
*2 Close the inner cover, and press the
Resume/Cancel button.
Close the inner cover, and press the
*2 Resume/Cancel button.
Close the inner cover, and press the
Resume/Cancel button.
Close the inner cover, and press the
Resume/Cancel button to clear the error.
The paper being printed at error occurrence
will be ejected without printing the
remaining data for the ejected paper, then
printing will resume from the next page.
Open the inner cover which functions as the
CD / DVD tray feeder, set the CD / DVD
tray in the feeder, and press the
Resume/Cancel button.
Open the inner cover, and press the
Resume/Cancel button to clear the error.
*1 The CD or DVD being printed at error
occurrence will be ejected without printing
the remaining data for the ejected CD or
DVD, then the next print job will be done.
Replace the wrong ink tank(s) with the
correct one(s).
Install the ink tank(s) in the correct
position.
Pressing the Resume/Cancel button will
exit the error, and enable printing.
Remove the cable between the camera and
the printer.
Press the Resume/Cancel button to eject the
paper being used at error occurrence.
Printing will resume from on the front side
of the next page.
Press the Resume/Cancel button.
- If paper is being fed at error occurrence,
the error is indicated after the paper is
ejected.
- If the error occurs, the print head
alignment values are not changed.
- After exit from the error by the
1-6
The service call
error, indicating
the waste ink
absorber is full, is
likely to occur
soon.
Data which was to
be printed on the
back side of paper
at error occurrence
is skipped (not
printed).
The error is
indicated when the
pattern is not
printed due to no
ink or non-ejection
of ink, or when the
sensor's AD value