Setting The Ipt1020-Sd Headset Transmit Volume; Viewing Ipt1020-Sd Terminal Information - Toshiba DKT3010-SD - Digital Phone User Manual

IPT1020-SD Settings

Setting the IPT1020-SD Headset Transmit Volume

Setting the IPT1020-SD Headset Transmit
Volume
1. Press + + +
2. Press .
3. Press the Feature Buttons to turn the LEDs On/Off for the desired volume
transmission level (see
4. Press FB4 for handset voice output in speakerphone mode (LED On = with, LED
Off = without).
5. Press
6. Go off-hook and hang up.

Viewing IPT1020-SD Terminal Information

1. Press + + +
2. Press , then press
3. Press
only).
4. Press
5. Go off-hook and hang up.
96
(simultaneously).
Table
Table 15 Volume Level Transmitted from Headset Microphone
LEDS
FB3 FB2
ON ON
ON ON
ON OFF
ON OFF
OFF ON
OFF ON
OFF OFF
OFF OFF
to set the above data.
(simultaneously).
.
to view IPT firmware version (application and boot versions, read
to view IPT MAC address (read only).
15).
Transmit Level
FB1
ON Level 7 (min.)
OFF
ON
OFF
ON Level 3 (initial value)
OFF
ON
OFF Level 0 (max.)
Strata CTX DKT/IPT Telephone
Level 6
Level 5
Level 4
Level 2
Level 1
06/03