Introduction; Preparing The Printer - Canon Pixma iP5200 Quick Start Manual

Introduction

Thank you for purchasing a Canon Inkjet Printer.
This Quick Start Guide uses the following symbols to indicate important information. Always observe the
instructions indicated by these symbols.
Instructions that, if ignored, could result in death or serious personal injury caused by incorrect
operation of the equipment. These must be observed for safe operation.
Instructions that, if ignored, could result in personal injury or material damage caused by incorrect
operation of the equipment. These must be observed for safe operation.
Instructions that must be observed for safe operation.
Also read the Safety Precautions in the User's Guide. Observe the warnings and cautions to avoid
personal injury or damage to the printer.
Trademark Notices
• "Windows" and "Internet Explorer" are trademarks of Microsoft Corporation, registered in the United
States and other countries.
• "Macintosh" and "Mac" are trademarks of Apple Computer, Inc., registered in the U.S. and other
countries.
Copyright ©2005 CANON INC.
All rights reserved. No part of this publication may be transmitted or copied in any form whatsoever
without the express written permission.

Preparing the Printer

1
Place the printer on a flat surface.
2
Remove the tape from the printer.
3
Before turning on the printer, open the
Top Cover and remove the protective
material and tape from the printer.
Be sure to remove the protective material before you turn
on the printer.
The tape position is subject to change.
4
Close the Top Cover.
1