Removal Procedure
7.4 Removal of PCBs
* The back cover has
been removed.
1. Removing the
inverter PCB
(1) Detach the connector
(CN1) and remove
the inverter PCB.
2. Removing the power
PCB
(1) Detach the
connectors (S2, S6,
S8, S9 and S10) on
the power PCB
(A1P).
38
Procedure
EDBE81-327
WARNING
Make sure the unit is disconnected from
any power source before disassembly.
Points
Photocatalytic Air Purifiers