Safety Afety; Instructions For Safe Operations; Warning; Attention - Contec CMS-50E User Manual

1. 1. 1. Safety Safety
Safety
1. 1. 1.1 1 1 . . . Instructions Instructions for
Instructions for for safe

Check the main unit and all accessories periodically to make sure that there is no visible damage
that may affect patient's safety and monitoring performance about cables and transducers. It is
recommended that the device should be inspected at least once a week. Please stop using the monitor
if there is obvious damage to the device.

Necessary maintenance must be performed by qualified service engineers ONLY. There are no
user serviceable parts and users are not permitted to service the device by themselves.

The oximeter cannot be used together with devices not specified in User's Manual.Only the
accessory that appointed or recommendatory by manufacture can be used with this device.

This product is calibrated before leaving factory.
1.2

1.2. . . Warning

Warning
1.2 Warning

Explosive hazard—DO NOT use the oximeter in environment with inflammable gas such as
some ignitable anesthetic agents.

.DO NOT use the oximeter while the testee measured by MRI and CT.

Be careful with the use of the lanyard cord. Improper use of the lanyard cord will cause device
damage not covered under the manufacturer's warranty. Swinging the device by the lanyard cord will
void the warranty. Please do not use lanyard cord if allergic to lanyard cord.

The disposal of scrap instrument and its accessories and packings(including battery, plastic
bags, foams and paper boxes) should follow the local laws and regulations.Please check the packing
before use to make sure the device and accessories are totally in accordance with the packing list, or
else the device may have the possibility of working abnormally.

Please choose the accessories and probe( optional ) which are approved or manufactured by the
manufacturer, or else it may damage the device.

The device can only be matched with the compatible probe( optional ).

Please don't measure this device with function test paper for the device's related information.
1.3 1.3 1.3. . . Hazards Hazards Hazards

Keep the oximeter away from dust, vibration, corrosive substances, explosive materials, high
temperature and moisture.

If the oximeter gets wet, please stop using it immediately.

When it is carried from cold environment to warm or humid environment, please do not use it
immediately

DO NOT operate keys on front panel with sharp materials.
safe operations
safe operations operations
1