Table of Contents
Advertisement
All manuals and user guides at all-guides.com
1. 1. 1. 1. Safety
Safety
Safety
Safety
1.1.
Instructions
for
safe
1.1.
1.1. Instructions
1.1.
Instructions
Instructions for
for safe
for
safe
safe operations
�
Check the main unit and all accessories periodically to make sure that there is no visible
damage that may affect patient's safety and monitoring performance about cables and transducers. It
is recommended that the device should be inspected at least once a week. Please stop using the
oximeter if there is obvious damage to the device.
�
Necessary maintenance must be performed by qualified service engineers ONLY.The users are
not permitted to service the device by themselves.
� The oximeter cannot be used together with devices not specified in User's Manual.Only the
accessory that is appointed or recommendatory by manufacture can be used with this device.
� This product is calibrated before leaving factory.
1.2.
Warning
1.2.
1.2. Warning
1.2.
Warning
Warning
�
Explosive hazard—DO NOT use the oximeter in environment with inflammable gas such as
some ignitable anesthetic.
�
DO NOT use the oximeter while the patient is being scanned by MRI or CT.
�
DO NOT strand the lanyard in order to avoid device drop and damage.The lanyard is made of
non-sensitive material.Please do not use lanyard if the user is allergic to lanyard.Do not enwind neck
with lanyard in order to avoid accident.
�
The disposal of scrap instrument and its accessories and packings(including battery, plastic
bags, foams and paper boxes) should follow the local laws and regulations.Please check the packing
before use to make sure the device and accessories are totally in accordance with the packing list, or
else the device may have the possibility of working abnormally.
�
The person who is allergic to rubber can not use this device.
�
The disposal of scrap instrument and its accessories and packing (including battery, plastic
bags, foams and paper boxes) should follow the local laws and regulations.
�
Please check the packing before use to make sure the device and accessories are totally in
accordance with the packing list, or else the device may have the possibility of working abnormally.
�
Please choose the accessories which are appointed or recommended by the manufacturer for
avoiding device damage.
�
Please choose the battery chargers which should be ensured compliance with the requirements
of IEC 60601-1, or else it may damage the device.
�
Please don't use the device in the course of charging.
�
The device can only be matched with the compatible probe( optional ).
�
Please don't measure this device with functional tester for the device's related information.
operations
operations
operations
1
Advertisement
Table of Contents
