2.10
External Music Connection
One music source, such as a radio (user-supplied), can be connected to the system as
illustrated below.
Insert the plug to the earphone/headphone jack on the external music source.
Use an EIAJ RC-6701 A plug (2-conductor, ø 3.5mm in diameter).
• Input impedance: 8 Ω
Maximum length of the cable
AWG 18 – 22: Under 10 m (33 feet)
• System programming for the music sources used for Music on Hold and Background
!
!
Music (BGM) is required.
• To adjust the sound level of the Music on Hold, use the volume control on the external
music source.
• External Music jack is a SELV port and should only connect to approved SELV device or
connect via a Line Isolation Unit with a Telecommunications Compliance Label.
• Required System Programming
Section 4.2, System Programming
[111] Hold Music Selection
• Feature Reference
Section 3, Features
Music on Hold / Background Music (BGM)
External Music Jack
EXT.
E R
P O W
MUSIC
External Music source
2-11
Installation