Turn On The System - KVH Industries TracVision M7 Installation Manual

Turn On the System

13
Follow these steps to turn on the TracVision
system.
a. Ensure the antenna has a clear, unobstructed
view of the sky so it can receive satellite
signals.
b. Apply power to the satellite TV receiver(s)
and TV(s).
c. Set the switchplate's power switch to the
"on" position to apply power to the
TracVision system (see Figure 30).
d. Wait one minute for system startup. When
the MCP display shows "Set up satellite(s),"
proceed to the next step.
16
Figure 30: Switchplate Power Switch
ON
OFF