D-Link DCS-6220 User Manual page 110

DCS-660 User's Manual Using IP surveillance Software
Playback Program (continued)
When you successfully log in to the playback system, the main window will be shown on the top of the
screen and the display resolution will be changed to 104x768 automatically (see previous page). There
are four main areas , i.e. display area, histogram area, control area, and status area. There are also three
visualized controls , i.e. area selection indicator, frame selection indicator, and pull bar. These features
provide much more convenience while searching recorded video in the IP surveillance database.
Main Areas
Display Area
The display area is able to show the surveillance database of each camera by time. You can change the
video size through the display adjustment tool and the playback method through the play control tool.
Under the normal display mode as shown in the figure below, you can just double click on the frame area
to change the frame size to 1:1 or .5:1.
Playback method
Display adjustment tool
D-Link Systems, Inc. 110