Vision Fitness E3000 Assembly Manual page 5

2
STEP
STEP
1
STEP
STEP
5
ORANGE BAG
1
• Slide the rear foot into place and
secure with two bolts (M8x20L) and
two lock washers (M8) to the outside
holes. Secure with two bolts (M8x65L)
and two lock washers (M8) to the
inside holes. Tighten with the 5
wrench.
MODEL E3000 ONLY: Proceed to
Step 3 after completion of Step 1.
BLUE BAG
2
• Slide the front axle into the plastic
sleeve of the front foot. Place a
washer (M16) on each end of the
axle.
• Slide a transport wheel onto each
end of the axle. With the 5
wrench, tighten a bolt (M8x19L) and
washer (M8) to each end of the axle.
Allen
MM
Allen
MM