Table of Contents
Advertisement
Measuring duty cycle — current path
The range and resolution of the duty cycle measurement via the current
path follows the configuration of the AC current measurement.
1 Press
2 Press Hz ms % again (until the duty cycle annunciator is shown on the
3 Connect the red and black test leads to input terminals I (red) and
4 Probe the test points and read the display.
U3606A User's and Service Guide
I
> Hz ms % to make frequency measurements via the current
path. The AC current measurement display will flash briefly before the
frequency measurement display is shown.
display) to make duty cycle measurements.
LO (black) respectively as shown in
Digital Multimeter Operation
Making Measurements
Duty cycle annunciator
Figure 2-
6.
2
45
Advertisement
Table of Contents
