Clearing Paper Jams In The Adf - Canon MultiPASS F50 User Manual

F50 Chapter 6-33.qxd
MultiPASS F50 User's Manual
To load a document in the ADF:
• Lift the document cover to make sure there
are no documents on the platen glass.
• Adjust the document guide tabs as needed.
• Insert the document(s) in the ADF tray as
shown, facing up.
The F50 MFP will feed the top page first.
You can load up to 30 letter- or legal-size pages
of 20 lb. paper in the ADF at one time.
If a paper jam occurs, see below.
To load a document directly on the platen glass:
• Place the document on the platen glass,
face down.
• Align the upper left corner of the
document to be copied with corner shown.
• Place the top of the document flush to the
guide plate.

Clearing Paper Jams in the ADF

If documents are fed into the ADF (automatic document feeder) improperly, they
can jam.
To remove a jam in the ADF:
Stop operation
1
Press
2 Remove paper
If more than one document is loaded, remove
all pages from the ADF except the jammed
page.
5 5 0 0
6/20/01 5:15 PM Page 50
to stop the operation.