Tc/Ub/Clock Menu Screen - JVC GY-DV5000 Instructions Manual

11-11 TC/UB/CLOCK Menu Screen

Time codes and user's bits can be set on this screen. Date and time is set on the screen that can be reached from this screen.
Item
TC PRESET To preset the time code, align the cursor with this position and then press
the SHUTTER dial.
EXECUTE: The set time code is confirmed.
CANCEL: The set time code is cancelled.
TC CLEAR To reset the time code setting, set to EXECUTE and then press the
SHUTTER dial.
CANCEL: Setting is not reset.
EXECUTE: Setting is reset
UB PRESET To preset the user's bit data, align the cursor with this position and then
press the SHUTTER dial.
EXECUTE: The set user's bit data are confirmed.
CANCEL: The set user's bit data are cancelled.
UB CLEAR To reset the user's bit data setting, set to EXECUTE and then press the
SHUTTER dial.
CANCEL: Setting is not reset.
EXECUTE: Setting is reset
MEMO:
For presetting of the time code and the user's bit data, see page 63.
DROP/ To select the time code generator's framing mode as either drop or non-
NON DROP drop mode.
DROP:
NON DROP: The internal time code generator runs in non drop mode.
TIME/DATE To make settings related to the date and time, align the cursor with this
position and then press the SHUTTER dial.
See "TIME/DATE Menu Screen" on page 76.
PAGE BACK The TOP MENU returns when the SHUTTER dial is pressed while the
cursor is at this position.
Function
The internal time code generator runs in drop mode. Choose
this setting when emphasizing the recorded time.
Choose this setting when emphasizing the frame number.
11. MENU SCREENS
Variation Range Initial Setting
EXECUTE EXECUTE
CANCEL
CANCEL CANCEL
EXECUTE
EXECUTE EXECUTE
CANCEL
EXECUTE CANCEL
CANCEL
DROP DROP
NON DROP
––––– –––––
––––– –––––
75