JVC GY-HD200U Instructions Manual page 79

Hd camera recorder
Hide thumbs Also See for GY-HD200U:
Table of Contents

Advertisement

* This is not displayed in VTR mode.
Item
ASPECT*
Sets the screen size for the recording video signal. (Can only be displayed and set in camera mode)
4:3
16:9
MEMO
• When the format setting is HDV and 1080I CAMERA mode, the ASPECT item is fixed at 16:9. ("[16:9]" is dis-
• The synchronous video signal is momentarily disturbed when the ASPECT item setting is switched.
HDV PB OUTPUT
When playing back an HDV recorded tape, set video format for component output from the Y/P
You can set the following depending on the FRAME RATE of the HDV recorded tape.
NATIVE
720P
1080I
NTSC
PAL
MEMO
• If you convert video recorded in HDV format to DV format and output it, the colors may change.
• This item is also applied to EE images when HDV signals are input to the IEEE1394 terminal.
• Fixed at NATIVE during DV recorded tape playback or DV signal input.
• When 1080I CAMERA is set to ON, 720P cannot be selected.
• When setting [1080I CAMERA] menu to ON while 720p is set, [HDV PB OUT PUT] menu will be set to [NATIVE].
DOWN CON. [HDV]
Set the style to display down-converted images in aspect ratio 4:3.
SQUEEZE
LETTER
MEMO
This setting is only valid in HDV mode.
In DV mode, the style becomes SQUEEZE regardless of the setting of this item.
NEXT PAGE
To display the VIDEO FORMAT[2/2] menu screen, move the cursor to this position and press the SHUTTER dial.
PAGE BACK
The TOP MENU returns when the SHUTTER dial is pressed with the cursor at this position.
Function/Setting (bold characters indicate initial settings)
: Outputs the video with an aspect ratio of 4:3.
: Outputs the video with an aspect ratio of 16:9.
The resolution in the vertical direction drops compared to 4:3 video.
played.)
Setting
Outputs the signal being recorded on the tape.
Converts the signal being recorded on tape to 720p and outputs it.
Converts the signal being recorded on tape to 1080i and outputs it.
Converts the signal being recorded on tape to 480i and outputs it.
Converts the signal being recorded on tape to 576i and outputs it.
: Image that is squeezed horizontally is displayed.
: Wide image with the top and bottom blackened is displayed.
Description
/P
terminal.
B
R
FRAME RATE
60/30
50/25
24
60/30
24
50/25
75

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gy-hd200eGy-hd200chuGy-hd200cheGy-hd201eGy-hd201che

Table of Contents