Install Lock - Schlage FE595 Installation Instructions Manual

Install Lock

1
Install latch.
Make sure latch angle faces door jamb.
Angle
Actual Size
3
Prepare keypad.
Remove sticker from hands-free post.
5
Adjust hands-free post.
The hands-free post holds the keypad and baseplate together
while installation is completed.
Jamb
OR
Wood Block
(Not Included)
Hands-free Post
Loosen post until it
extends ¹⁄₈" (3 mm)
to ¹⁄₄"(6 mm)
beyond door face.
¹⁄₈" (3 mm) – ¹⁄₄" (6 mm)
2
Install strike onto door jamb.
Angle
4
Install keypad.
Bar should slide smoothly through hole in
latch. If not, check door dimensions.
6
Install baseplate.
Actual Size
IMPORTANT
Wire must slide
under latch.
Route wire through
opening as shown.
Snap baseplate onto hands-free post.
The hands-free post will hold the lock
on the door.