Faults Or Tamper Conditions; System Fault Or Tamper Analysis Mode - Bosch AMAX panel 2000 User Manual

10 en | Faults or Tamper conditions
3

Faults or Tamper conditions

Whenever a system fault or tamper condition occurs, the FAULT or MAINS indicator flashes
and the keypad beeps.
NOTICE!
Operation can be carried out only in status.
3.1

System fault or tamper analysis Mode

To enter fault or tamper analysis mode for determining a system fault or tamper condition:
1.
2.
3.
F.01U.249.500 | V2 | 2011.11
Enter your Code and [2] and press [#]. Two beeps sound.The FAULT indicator remains lit
and the STAY and AWAY indicators flash. The lit zone indicators indicate the type of fault
or tamper condition that occurred.
For a multi-level menu, enter the corresponding number to enter the submenu, press [ 0
] key to return to the main menu.
To exit from Fault and Tamper Analysis Mode, press [#] . The STAY and AWAY indicators
are extinguished and the FAULT indicator remains lit, and the keypad stops the beep.
User Guide Robert Bosch Engineering and Business Solutions Limited
AMAX panel 2000 / AMAX panel 2000 EN