Table of Contents
Advertisement
VIVOTEK
ss
integer>
type
lan,
pppoe
<product
dependent>
resetip
<boolean>
ipaddres
<ip
s
address>
subnet
<ip
address>
router
<ip
address>
dns1
<ip
address>
dns2
<ip
address>
128 - User's Manual
lan
6/6
1
6/6
<product
6/6
dependent>
<blank>
6/6
<blank>
6/6
<blank>
6/6
<blank>
6/6
as follows:
Bit 0 => HTTP service;
Bit 1=> HTTPS service;
Bit 2=> FTP service;
Bit 3 => Two way audio and RTSP Streaming
service;
To stop service before changing its port settings.
It's recommended to set this parameter when
change a service port to the port occupied by
another service currently. Otherwise, the service
may fail.
Stopped service will auto-start after changing
port settings.
Ex:
Change HTTP port from 80 to 5556, and change
RTP port for video from 5556 to 20480.
Then, set preprocess=9 to stop both service first.
"/cgi-bin/admin/setparam.cgi?
network_preprocess=9&network_http_port=555
6& network_rtp_videoport=20480"
Network connection type.
1 => Get ipaddress, subnet, router, dns1, dns2
from DHCP server at next reboot.
0 => Use preset ipaddress, subnet, rounter,
dns1, and dns2.
IP address of server.
Subnet mask.
Default gateway.
Primary DNS server.
Secondary DNS server.
Advertisement
Table of Contents
