Assigning Functions To Keys - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Program/Service
>
*
91=Prog. feature key?
Change feature?
>
>
Store incomplete feat?
End?
>
Program another key?
Saving Station Numbers, Functions, Procedures and Appointments

Assigning Functions to Keys

Press the key. The LED lights up.
:
Select and confirm.
or
qme
Enter the code.
Press the key. If the relevant key is already pro-
grammed, the programmed function appears on the
screen.
:
Confirm.
:
Select and confirm function, for example, "Do not dis-
turb".
All programmable functions appear on the screen. See
Quick-Reference Operating Instructions (Appendix):
section ... about function keys.
if necessary
:
Select and confirm.
Some functions (such as, "Call forwarding") accept in-
complete entries. You must then add supplementary
digits when you activate the function later by pressing
the relevant key.
:
Confirm.
or
:
Select and confirm.
Now press the key to access the function direct-
ly. Certain functions, such as, "Do not disturb",
can be enabled and disabled like radio buttons.
For example, press once to enable the function
and then a second time to disable it.
For information on display messages when sav-
ing functions page 223
69