Before You Begin; Important Notes - Siemens HiPath 500 Operating Instructions Manual

Before You Begin

Before You Begin
These operating instructions describe the optiPoint 600 office telephone on your
HiPath 500 and HiPath 3000 / 5000.
They describe all functions you can use from your telephone. You may find that some func-
tions you wish to use are not available on your telephone. This may be due to one of the
following reasons:
• The function has not been configured for your telephone – please contact your service
personnel.
• Your communications platform does not support this function – please contact your
service personnel.

Important Notes

Do not operate the telephone in environments where there is a danger of
explosions.
Use only original Siemens accessories
ries may cause a hazard and will invalidate the warranty and the CE mark.
Never open the telephone or a key module. If you encounter any problems,
ask the service personnel.
CE (customer equipment) does not continue to support emergency dialing after loss of
mains power, if battery back up and power fail switchover to emergency analogue phones
is not available.
The information provided in this document contains merely general descriptions or charac-
teristics of performance which in case of actual use do not always apply as described or
which may change as a result of further development of the products.
An obligation to provide the respective characteristics shall only exist if expressly agreed
in the terms of contract.
The trademarks used are owned by Siemens AG or their respective owners.
Never allow the telephone to come into contact with staining or aggressive liquids such as
coffee, tea, juice, or soft drinks. For information on telephone maintenance
2
Page 221. Using other accesso-
Page 222.