Cadillac 2011 Escalade Owner's Manual page 240

7-38 Infotainment System
Remote Control
To use the remote control, aim it at
the transmitter window at the rear of
the RSE overhead console and
press the desired button. Direct
sunlight or very bright light could
affect the ability of the RSE
transmitter to receive signals from
the remote control. If the remote
control does not seem to be
working, the batteries might need
to be replaced. See Battery
Replacement later in this section.
Objects blocking the line of sight
could also affect the function of the
remote control.
If a CD or DVD is in the Radio DVD
O
slot, the remote control
button can be used to turn on the
video screen display and start the
disc. The radio can also turn on the
video screen display. See CD/DVD
Player on page 7 19 for more
information.
Storing the remote
control in a hot area or in direct
sunlight can damage it, and the
repairs will not be covered by the
warranty. Storage in extreme cold
can weaken the batteries. Keep
the remote control stored in a
cool, dry place.
If the remote control becomes lost
or damaged, a new universal
remote control can be purchased.
If this happens, make sure the
universal remote control uses a
®
code set of Toshiba .
I n f o r ma t i o n P r o v i d e d b y :
Remote Control Buttons
O
(Power): Press this button to
turn the video screen on and off.
P
(Illumination): Press this button
(power)
to turn the remote control backlight
on. The backlight automatically
times out after 7 to 10 seconds if no
other button is pressed while the
backlight is on.
v
(Title): Press this button to
return the DVD to the main menu of
the DVD. This function could vary
for each disc.
y
(Main Menu): Press this button
to access the DVD menu. The DVD
menu is different on every DVD.
Use the navigation arrows to move
the cursor around the DVD menu.
After making a selection press the
enter button. This button only
operates when using a DVD.
n q p
, , ,
Arrows): Use the arrow buttons to
navigate through a menu.
o
(Menu Navigation