S-Video/Video Connections - JVC SR-VD400E Instructions Manual

6
EN
Aerial or cable
TV (HD Ready)
Component
Video Cable (not
supplied)
Audio cable
(supplied)
OUT
REMOTE PAUSE/ AUDIO
R L
AV COMPULINK
Back of VCR
[AUDIO OUT]
To [AUDIO
IN]
Audio cable
(supplied)
To
[AUDIO
OUT]
OUT
REMOTE PAUSE/ R AUDIO L
AV COMPULINK
Another D-VHS Digital Recorder (SR-VD400E)
NOTES:
To operate the VCR with your TV using the component or S-video connection, set your TV to the AV mode using the
TV's Remote.
You can also use the [TV/VCR] button on the VCR's Remote to set your TV to the AV mode (
If you cannot see the pictures on the TV screen when you play back a tape, set "TV OUTPUT 1" to the appropriate
mode ( page 38).
Digital HD Video
Camera (JY-HD10)
To [S/AV]
S/AV/Editing
cable (not
supplied)
To [AUDIO
IN]
To front
input
connectors
Y P B /C B P R /C R
i.LINK IN/OUT
IN
DV IN
S VIDEO IN(L-1) S VIDEO
S400
DIGITAL OUT
OPTICAL
AUDIO PCM/DOLBY DIGITAL
VIDEO R L VIDEO
IN(L-2)
To [S VIDEO
IN]
S-video
cable
(supplied)
To [S VIDEO
OUT]
Y P /C P /C
B B R R
i.LINK IN/OUT
IN
DV IN
S VIDEO S VIDEO
IN(L-1) S400
DIGITAL OUT
OPTICAL
VIDEO R AUDIO L VIDEO PCM/DOLBY DIGITAL
IN(L-2)
INSTALLING YOUR NEW VCR (cont.)

S-VIDEO/VIDEO Connections

First follow Preparations on page 5, then go to the following
steps.
1
Make connections
— Connect VCR to TV
Refer to 1 'Connect VCR to TV' on page 5.
— Connect VCR to the Digital HD Video
Camera (JY-HD10)
Connect an audio/S-video cable between the
VCR's [AUDIO/S VIDEO IN] connectors and JY-
HD10's [S/AV] connectors.
— Connect VCR to another VCR (SR-VD400E)
Connect an audio/S-video cable between the
playback VCR's [AUDIO/S VIDEO OUT]
connectors and the recording VCR's [AUDIO/
S VIDEO IN] connectors.
2
Connect VCR to power source
Connect the AC power plug to the AC outlet.
3
Final preparation for use
Turn on the VCR.
You can now perform 'basic playback'
( page 8) or 'editing' ( page 18).
page 45).