Table of Contents
Advertisement
To use a Master Edit Control-equipped JVC
NTSC camcorder
If you are using a JVC NTSC camcorder equipped with
the Master Edit Control, you can control the VCR from
the camcorder.
1 Access the "ADDITIONAL" screen (
then set "AV COMPU-LINK" to "OFF" after
performing step 6 on page 20.
The [REMOTE PAUSE/AV COMPULINK]
connector works as a Remote Pause connector
when "AV COMPU-LINK" is set to "OFF".
For details, refer to the camcorder's instruction
manual.
2 Engage the VCR's recording pause mode.
Various connections for editing tapes
The following three methods can be used for editing tapes.
VHS to S-VHS editing (VIDEO-VIDEO connection):
Although the picture quality is inherently limited by the
original VHS quality, the edited tape has better picture
quality than those made by VHS-to-VHS editing.
S-VHS to VHS editing (VIDEO-VIDEO connection):
Since the original source is recorded in S-VHS mode, the
edited tape has better picture quality than those made by
VHS-to-VHS editing.
S-VHS to S-VHS editing (S-VIDEO connection):
Original picture quality of S-VHS made can be duplicated
with minimal picture degradation. This is the best editing
method you can use on S-VHS VCRs.
Other useful functions for recording
You can also use the following functions for recording.
"V. Calibration" (S-VHS/VHS only) (
When this function is set to "ON", this VCR checks the
condition of the tape in use during playback and recording,
and compensates to provide the highest-possible pictures.
S-VHS Recording Mode (
page 40)
This VCR allows you to record on a D-VHS and S-VHS tape
with VHS picture quality.
S-VHS ET (
page 41)
This function allows you to record on VHS tapes with S-VHS
picture quality. Tapes recorded using this function can be
played back on a VCR equipped with the S-VHS ET function.
NOTE:
When the channel is changed on the VCR;
The "STEREO" indication appears on the screen for about
5 seconds if the program is a stereo broadcast.
Compatibility Of Cassettes And Recording Mode
Cassette
page 39),
D-VHS
S-VHS
VHS
* To record on the VHS cassette with S-VHS quality, use the
S-VHS ET function (
NOTES:
The D-VHS (MTP), S-VHS, S-VHS ET and VHS mode recordings
are possible with this VCR.
To record in the D-VHS mode, use a D-VHS cassette.
To record in the S-VHS/VHS mode, you can use a D-VHS,
S-VHS or VHS cassette.
To record in S-VHS mode on D-VHS tapes:
Press [D-VHS] to turn off the [D-VHS] indicator. Then, set "S-
VHS MODE" to "ON" (
To record in VHS mode on D-VHS tapes:
Press [D-VHS] to turn off the [D-VHS] indicator. Then, set "S-
VHS MODE" to "OFF" (
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
page 36)
remove its record safety tab.
To record on it later, cover the hole with adhesive tape.
Recording Mode
D-VHS
S-VHS
Yes
Yes
No
Yes
No
Yes*
page 41).
page 40).
page 40).
Record safety tab
21
EN
VHS
Yes
Yes
Yes
Advertisement
Table of Contents
